Three new tuning modes The DT-4 illuminates the green LEDs around its circumference in one of three tuning modes: Strobe, Mirror, or Meter. There are also triangular red tuning guides that indicate whether the input is sharp or flat, helping you tune your instrument more precisely.
Strobe mode The green LEDs will stop moving when your instrument is in tune. The LEDs will move in a clockwise direction if the pitch of your instrument is sharp, or counter-clockwise if it is flat. When the tuning is correct, the two tuning guides will also light simultaneously.
Mirror mode Mirror mode is a new concept of tuning found only in the DT-4. When the two green LED’s at the lower left and right coincide, you're perfectly tuned. The bright green LED will move to the right of center if the input pitch is sharp, or to the left if it is flat. The distance between the bright green and dim green LED’s indicate the distance to perfect tuning.
Meter mode Tune your instrument so that the bright green LED is aligned with the red tuning guide in the center as on a conventional needle type tuner.
Designed for easy operation The DT-4 is designed for easy operation, with switches located for effortless operation when held in the palm of your hand. In Strobe mode if approximately thirty seconds have elapsed without any input sound, the rotating red LED’s will go dark. If approximately ten minutes have elapsed with no audio input while powered-on, the DT-4 will automatically turn off to prevent unnecessary battery consumption.
Kosmic Super Deals
Add our super specials RSS feed here and keep up to date!